And the Mice come marching in ...

A place to discuss DIY pest control
Post Reply
User avatar
TommyTester
TLF Supporter
Posts: 494
Joined: Tue Jul 03, 2018 11:49 am
Location: Lakeville Minnesota
Grass Type: Northern Mix/PR
Lawn Size: 9000
Mower: Troy Bilt 42' Hydro Rider
Contact:

And the Mice come marching in ...

Post by TommyTester » Sat Nov 02, 2019 8:34 am

The annual wave of basement invaders. Enter at your own risk.


User avatar
daniel3507
TLF Supporter
Posts: 379
Joined: Tue Jul 31, 2018 8:37 am
Location: NE Oklahoma
Grass Type: Common Bermuda
Lawn Size: 1800sq ft
Mower: Rotary

Re: And the Mice come marching in ...

Post by daniel3507 » Mon Nov 04, 2019 7:52 am

That was way more creepy than it needed to be. Very nicely done!

User avatar
TommyTester
TLF Supporter
Posts: 494
Joined: Tue Jul 03, 2018 11:49 am
Location: Lakeville Minnesota
Grass Type: Northern Mix/PR
Lawn Size: 9000
Mower: Troy Bilt 42' Hydro Rider
Contact:

Re: And the Mice come marching in ...

Post by TommyTester » Tue Nov 05, 2019 6:17 am

@daniel3507

Learning what works ...

Last edited by TommyTester on Wed Nov 06, 2019 6:28 am, edited 1 time in total.

stogie1020
Posts: 106
Joined: Tue Sep 10, 2019 1:15 pm
Location: Phoenix, AZ
Grass Type: Bermuda
Lawn Size: 900SqFt
Mower: Scott's 20in Push Reel

Re: And the Mice come marching in ...

Post by stogie1020 » Tue Nov 05, 2019 9:59 am

As gruesome as this is, I enjoy watching these videos!

desirous
Posts: 98
Joined: Fri Dec 15, 2017 5:39 pm
Location: Metrowest Boston
Grass Type: Northern Mix
Lawn Size: 6000
Mower: Honda HRX217

Re: And the Mice come marching in ...

Post by desirous » Tue Nov 05, 2019 10:22 pm

@TommyTester, have you tried the cheap single-use mouse traps, like this one: https://www.homedepot.com/p/Victor-Meta ... /203736586 I've had good luck with them, your traps look too fancy...

Also, if you are going for gruesome, film some open-face glue plates...

User avatar
TommyTester
TLF Supporter
Posts: 494
Joined: Tue Jul 03, 2018 11:49 am
Location: Lakeville Minnesota
Grass Type: Northern Mix/PR
Lawn Size: 9000
Mower: Troy Bilt 42' Hydro Rider
Contact:

Re: And the Mice come marching in ...

Post by TommyTester » Wed Nov 06, 2019 5:33 am

@desirous Yes, they work well but also sometimes do not trigger. The mice can lick them clean. That is why I switched to the "black" plastic ones with the bait cup, forcing them to step on the trigger plate, but clearly these also sometimes don't trigger.

The style below seems to work pretty well, are easy to set, and can be cleaned and reused many times. Caught this guy this morning. This style doesn't draw blood which I think leaves a scent that deters future diners. ;)

Based on my surveillance of these critters, I have some mouse trap ideas of my own I plan to test. :bandit:

Image
Last edited by TommyTester on Wed Nov 06, 2019 5:44 am, edited 2 times in total.

Easyluck
Posts: 73
Joined: Tue Feb 05, 2019 3:54 pm
Location: Nashville, TN
Grass Type: Bermuda front / Fescue back
Lawn Size: 12,000 sqft
Mower: Rotary

Re: And the Mice come marching in ...

Post by Easyluck » Thu Nov 07, 2019 5:37 am

Have you figured out how the mice are getting inside?

User avatar
TommyTester
TLF Supporter
Posts: 494
Joined: Tue Jul 03, 2018 11:49 am
Location: Lakeville Minnesota
Grass Type: Northern Mix/PR
Lawn Size: 9000
Mower: Troy Bilt 42' Hydro Rider
Contact:

Re: And the Mice come marching in ...

Post by TommyTester » Thu Nov 07, 2019 7:24 am

@Easyluck ... They can get in through holes the size of a pencil eraser. If there is no hole, they make one, mainly through the backside of the wood siding as it meets the foundation. I do patch the ones I find with steel wool, but some get in regardless as winter approaches. All the neighbors have the same problem as we live next to woods. As long as I stay ahead of them, they don't get into the living portion of the house.

By doing videos this time, I'm able to learn their behavior, with the goal to improve trapping.

Here's this morning's episode. Just one research assistant this time ... :mrgreen:

Last edited by TommyTester on Thu Nov 07, 2019 7:31 am, edited 2 times in total.

User avatar
TommyTester
TLF Supporter
Posts: 494
Joined: Tue Jul 03, 2018 11:49 am
Location: Lakeville Minnesota
Grass Type: Northern Mix/PR
Lawn Size: 9000
Mower: Troy Bilt 42' Hydro Rider
Contact:

Re: And the Mice come marching in ...

Post by TommyTester » Fri Nov 08, 2019 5:27 am

Experiments ...


User avatar
TommyTester
TLF Supporter
Posts: 494
Joined: Tue Jul 03, 2018 11:49 am
Location: Lakeville Minnesota
Grass Type: Northern Mix/PR
Lawn Size: 9000
Mower: Troy Bilt 42' Hydro Rider
Contact:

Re: And the Mice come marching in ...

Post by TommyTester » Sat Nov 09, 2019 4:45 am

A new concept and test.




User avatar
TommyTester
TLF Supporter
Posts: 494
Joined: Tue Jul 03, 2018 11:49 am
Location: Lakeville Minnesota
Grass Type: Northern Mix/PR
Lawn Size: 9000
Mower: Troy Bilt 42' Hydro Rider
Contact:

Re: And the Mice come marching in ...

Post by TommyTester » Wed Nov 13, 2019 4:31 am

Success. 2 for 2 tonight. I win. :bandit:

Beats any snap trap you can buy. Traps them instantly.

Last edited by TommyTester on Wed Nov 13, 2019 5:38 am, edited 1 time in total.

mtroo
Posts: 52
Joined: Tue Jul 31, 2018 10:33 am
Location: North Central Montana
Grass Type: KGB
Lawn Size: 18000
Mower: Hustler, Toro

Re: And the Mice come marching in ...

Post by mtroo » Wed Nov 13, 2019 5:43 pm

What's with the creepy mannequin? Love the trap idea.

User avatar
TommyTester
TLF Supporter
Posts: 494
Joined: Tue Jul 03, 2018 11:49 am
Location: Lakeville Minnesota
Grass Type: Northern Mix/PR
Lawn Size: 9000
Mower: Troy Bilt 42' Hydro Rider
Contact:

Re: And the Mice come marching in ...

Post by TommyTester » Thu Nov 14, 2019 4:13 am

mtroo wrote:
Wed Nov 13, 2019 5:43 pm
What's with the creepy mannequin? Love the trap idea.
@mtroo Actually, it had a scientific purpose. :nod:

I heard mice love to climb in hair/fur, perhaps from a history of digging through dead animals for food and bedding material. So far, no mice have shown interest in her plastic hair so she's been pulled from the project. :lol:

My balsa wood trap proved the concept works. Here are my Plexiglas prototype traps with 2 different side guard heights. I set them out last night but no mice came by.

Image
Last edited by TommyTester on Thu Nov 14, 2019 4:14 am, edited 1 time in total.

User avatar
TommyTester
TLF Supporter
Posts: 494
Joined: Tue Jul 03, 2018 11:49 am
Location: Lakeville Minnesota
Grass Type: Northern Mix/PR
Lawn Size: 9000
Mower: Troy Bilt 42' Hydro Rider
Contact:

Re: And the Mice come marching in ...

Post by TommyTester » Thu Nov 21, 2019 5:16 am

And 8 days later .... they're back.


User avatar
TommyTester
TLF Supporter
Posts: 494
Joined: Tue Jul 03, 2018 11:49 am
Location: Lakeville Minnesota
Grass Type: Northern Mix/PR
Lawn Size: 9000
Mower: Troy Bilt 42' Hydro Rider
Contact:

Re: And the Mice come marching in ...

Post by TommyTester » Sun Nov 24, 2019 5:58 am

I think I've figured out all their tricks. :bandit:


User avatar
440mag
Posts: 418
Joined: Mon Jan 29, 2018 7:15 am
Location: WesternNC
Grass Type: Blend tall fescues
Lawn Size: 30,000
Mower: JD X580

Re: And the Mice come marching in ...

Post by 440mag » Mon Nov 25, 2019 5:45 am

Cool thread and awesome videography.

I really feel for anyone with these pest problems, especially anything even approaching these numbers (I used to care take a retired farm, lived in a 20+ yoa double-wide NEXT TO A CORN FIELD ( :o :o :o !!! ) and the populations in these videos are OVER the top, man!

In my situation, as soon as the first frost hit the surrounding cornfields you could practically see the vermin coming IN WAVES, heading for the warmth of the trailer-home and the crawlspace under in it :?

Anyhoo, this was decades ago and all I had were glue traps with what appeared to be hemp seeds in the middle. Those glue traps were EFFECTIVE! I just had to get em up before the mice live-cannibalized one another (sometimes, within an hour of a mouse getting caught on a glue trap, other mice would begin gnawing on whichever of the caught mouse’s rear haunches were most exposed. Talk about gruesome ...)

Fascinating videos (thank you!) :thumbup:
Last edited by 440mag on Mon Nov 25, 2019 5:48 am, edited 1 time in total.
When it comes to everything, anytime I edit anything it is always because I forgot something! ;)

User avatar
TommyTester
TLF Supporter
Posts: 494
Joined: Tue Jul 03, 2018 11:49 am
Location: Lakeville Minnesota
Grass Type: Northern Mix/PR
Lawn Size: 9000
Mower: Troy Bilt 42' Hydro Rider
Contact:

Re: And the Mice come marching in ...

Post by TommyTester » Mon Nov 25, 2019 6:15 am

440mag wrote:
Mon Nov 25, 2019 5:45 am
I really feel for anyone with these pest problems.
We don't get many, a few per week this time of year. For 30+ years I just used regular Victor snap traps, and have seen it all including 1/2 eaten caught mice, bloody messes, and traps that disappear that I still haven't found :o .

Only since filming them have I seen how they behave and how they defeat many traps. I'm on track to develop one that is simple and can't be defeated. :bandit:

This one piece prototype #3 design is awaiting lab participants as we speak. :mrgreen:
Image
Last edited by TommyTester on Mon Nov 25, 2019 6:28 am, edited 2 times in total.

User avatar
TommyTester
TLF Supporter
Posts: 494
Joined: Tue Jul 03, 2018 11:49 am
Location: Lakeville Minnesota
Grass Type: Northern Mix/PR
Lawn Size: 9000
Mower: Troy Bilt 42' Hydro Rider
Contact:

Re: And the Mice come marching in ...

Post by TommyTester » Sun Dec 08, 2019 5:39 am

Finally, after a long wait, another candidate came in for an interview as a Lab Assistant last night. He made history. :thumbup:


Post Reply